Commercial Water - Cooled Industrial Process Chillers For Blow
Moulding / Blister Packing Machines
Chemical / pharmaceutical process
Plastic industry for injection moulding
Thermo and vacuum forming
Blister packing machines
Process control industry
Offset web printing
Die casting and induction hardening machines
CNC wire cut machines
Spindle motor and linear motor cooling in machine tools
CAT / MRI scanners
Film processing equipment
A processing chiller is a mechanical device used to facilitate heat
exchange from water to a refrigerant in a closed loop system. The
refrigerant is then pumped to a location where the waste heat is
transferred to the atmosphere.
This processing chillers offer water-cooled type and air-cooled
type. All models are equipped with compressor and pump overload
protector, phase shortage and reversal alarm, anti - freeze
thermostat, pressure gauge etc. They feature excellent performance
and a long life span. This series of working flow is based on the
basic principle of heat exchange. It is applicable to the industry
that requires flow of precisely controlled chilled water, and
considered as indispensable equipment for modern industry.
Specification / Supplier
Temp Control Scope (℃)
7- Normal atmospheric temperature
Shell and Tube / 1set
Chilled water flow(m3/h)
Heat exchanger / 1set
Cold water flow(m3/h)
2,Fan overload protector
3,High/low voltage protector
4,Coil overheat protector
LS / Carlo
Remarks: the cooling capacity is based on the condenser temperature
40C,outlet temperature 7C.
To give you our best offer one time,please indicate:
1.What is the cooling capacity you need?
2.Air cooled or water cooled?As you see,water cooled need a
separated cooling tower .
3.What is the outlet water/glycol/seawater temp you need?
4.What is the power supply?
5.Do you need water pump,water tank together?
6.Is there any special requirement for the
refrigerant?R22,R134A,R407C,R404A or other?
Welcome to contact email@example.com!